Moscow: +7 (499) 281-61-94
Saint-Petersburg: +7 (812) 495-90-55

Good to know

We do everything possible to ensure that the quality of our goods always stays on top, and its range could satisfy any of your needs in construction and landscape design. This section contains the main recommendations for the care and storage of SAVEWOOD products. Also here you will find answers to possible questions.

Go to the instructions section to find out everything about the installation and proper maintenance of SAVEWOOD products!

F.A.Q.

  • Consumer Information
  • Storage and Transportation
  • Taking care of WPC product

The wooden-polymer composite board can not be used in load-bearing structures and can withstand up to 1,500 kg / m2 of deck depending on the type of product.

The products from the wood-polymer composite of the Savewood brand contain 60% of wood and have a uniform color throughout the depth of the product. Small color deviations (halftone-tone) and the presence of wood fibers on the surface of the product emphasize imitation of natural wood and are not a defect.

Random stains on the surface are not a production fault, but a consequence of improper storage, and will disappear during the stabilization process.

The decking board can be treated with a woodworking tool similar to wood.

Savewood profiles must be stored in the manufacturer’s packaging.

Pallets containing Savewood profiles as well as separate Savewood profiles must be stored horizontally in a dry and ventilated area, away from direct sunlight and heaters, at temperatures from -35 ° C to + 50 ° C and relative humidity of 50% 60%.

For long-term storage it is necessary to use pallets or shelving, while the storage height of packages should not exceed 1 m.

For prolonged storage in the summer, it is not recommended to store products on open areas.

For long-term storage of products, it is necessary to open the package.

 

Store and transport the Savewood profiles in a horizontal position in the manufacturer’s packaging, securely fixing them, excluding their sliding between each other.

Unload and reload the Savewood profiles should be done with care, without throwing.

Pallets or racks partially stored outdoors, due to the influence of atmospheric phenomena (rain, UV), may differ in color. After they are completely laid out outside the premises, within 12-14 weeks color stabilization will take place.

Keep clean gaps between the boards and along the perimeter of the deck for good air circulation and drainage of rain and melt water.

Clean surface with water at a pressure of not more than 80 bar at a distance of at least 200 mm with the addition of detergent for the WPC.

To clean from contamination, do not use chlorinated solvents, alkaline substances, active oxidants, abrasives, brushes with stiff bristles.

Do not leave cleaning agents on the surface of the deck for more than a few minutes, rinse thoroughly with water.

If oil or grease gets to the surface, wash it off as soon as possible using a detergent for DPC or a solution of 1/3 of a glass of detergent and 2/3 cup of household cleaner per 4 liters of water.

Use stands for flower pots and other items, for example, pillows under the legs of furniture.

Do not use on decking mats made of rubber, their base can paint the surface. Use vinyl or fabric mats.

Do not place on the terrace flooring objects heated above 50 ° C, the flooring can be deformed.

Do not leave on the decking metal objects with stains of rust.

To clean the decking from snow, use only a plastic shovel and brush.

Do not exceed the permissible load per 1 sq.m of flooring.

Periodically check and adjust the quality of the mounting of the terrace board to the base of the flooring.